Quickly remove P1000 and finer sand marks producing a high gloss finish with Four Star Marine Gelcoat Cut & Polish!

Four Star Marine Gelcoat Cut & Polish is formulated to be a fast cut polish that removes P1000 and finer sand marks while leaving a high gloss finish. Not only is this formulation effective but it is also easy to use and clean up. There is no silicone in Gelcoat Cut & Polish so you can be sure you are removing surface damage rather than masking it under fillers. Follow with Four Star Marine Surface Protectant for months of protection from environmental elements.

• Shake Gelcoat Cut & Polish well before using.
• Make sure surface is clean and free of contaminants.
• Optimum performance is achieved by using an air or electric circular polisher set at 1200-1800 RPM while equipped with the Avenger Wool Buffing Pad.
• Apply Gelcoat Finishing Compound to surface to be buffed.
• Use medium pressure and move machine slowly back and forth keeping pad flat to the surface at all times.
• Reduce pressure as product begins to break down to create a high gloss finish.
• Wipe residue off using a clean microfiber towel.

Note: Meets VOC regulations in all states.

Recommended Surfaces
•Gelcoat surfaces